junipernetworks.junos.junos_lldp_interfaces 模块 – LLDP 接口资源模块

注意

此模块是 junipernetworks.junos 集合（版本 9.1.0）的一部分。

如果您正在使用 ansible 包，您可能已经安装了此集合。它不包含在 ansible-core 中。要检查是否已安装，请运行 ansible-galaxy collection list。

要安装它，请使用：ansible-galaxy collection install junipernetworks.junos。

要在 playbook 中使用它，请指定：junipernetworks.junos.junos_lldp_interfaces。

junipernetworks.junos 1.0.0 中的新增功能

概要 

此模块管理 Juniper JUNOS 设备上接口的链路层发现协议 (LLDP) 属性。

参数 

参数	注释
config 列表 / elements=字典	链路层发现协议接口属性配置的列表
enabled 布尔值	这是一个布尔值，用于控制在接口 `name` 上禁用 LLDP 选项 `false` `true`
name 字符串 / 必需	需要在其上配置 LLDP 的接口的名称。
running_config 字符串	此选项仅与状态 parsed 一起使用。此选项的值应是通过执行命令 show protocols lldp 从 Junos 设备接收的输出。状态 parsed 从 `running_config` 选项读取配置，并根据资源模块的 argspec 将其转换为 Ansible 结构化数据，然后该值将返回到结果中的 parsed 键中
state 字符串	模块完成后的配置状态。选项 `"merged"` ← （默认） `"replaced"` `"overridden"` `"deleted"` `"gathered"` `"rendered"` `"parsed"`

示例 

# Using merged
# Before state:
# -------------
# user@junos01# # show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;

- name: Merge provided configuration with device configuration
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/2
        enabled: false
    state: merged

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }

# Using replaced
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }

- name: Replace provided configuration with device configuration
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/2
        disable: false
      - name: ge-0/0/3
        enabled: false
    state: replaced

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2;
# interface ge-0/0/3 {
#     disable;
# }

# Using overridden
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }

- name: Override provided configuration with device configuration
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/2
        enabled: false
    state: overridden

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/2 {
#     disable;
# }

# Using deleted
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2;
# interface ge-0/0/3 {
#     disable;
# }
- name: Delete lldp interface configuration (this will not delete other lldp configuration)
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/3
    state: deleted

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/2;
# interface ge-0/0/1;
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }
- name: Gather junos lldp interfaces as in given arguments
  junipernetworks.junos.junos_lldp_interfaces:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "name": "ge-0/0/1"
#         },
#         {
#             "enabled": false,
#             "name": "ge-0/0/2"
#         }
#     ]
# After state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }
# Using rendered
- name: Render platform specific xml from task input using rendered state
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/2
        enabled: false
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:protocols
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:lldp>
#         <nc:interface>
#             <nc:name>ge-0/0/1</nc:name>
#             <nc:disable delete="delete"/>
#         </nc:interface>
#         <nc:interface>
#             <nc:name>ge-0/0/2</nc:name>
#             <nc:disable/>
#         </nc:interface>
#     </nc:lldp>
# </nc:protocols>"
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <protocols>
#             <ospf>
#                 <area>
#                     <name>0.0.0.0</name>
#                     <interface>
#                         <name>ge-0/0/0.0</name>
#                     </interface>
#                 </area>
#             </ospf>
#             <lldp>
#                 <interface>
#                     <name>ge-0/0/1</name>
#                 </interface>
#                 <interface>
#                     <name>ge-0/0/2</name>
#                     <disable/>
#                 </interface>
#             </lldp>
#         </protocols>
#     </configuration>
# </rpc-reply>
# - name: Convert lldp interfaces config to argspec without connecting to the appliance
#   junipernetworks.junos.junos_lldp_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#         {
#             "name": "ge-0/0/1"
#         },
#         {
#             "enabled": false,
#             "name": "ge-0/0/2"
#         }
#     ]

返回值 

常见的返回值记录在此处，以下是此模块独有的字段

键	描述
after 列表 / elements=字符串	模块完成后，配置作为结构化数据。返回：当更改时示例： `["返回的配置将始终与上述参数的格式相同。\n"]`
before 列表 / elements=字符串	调用模块之前的配置作为结构化数据。返回：始终示例： `["返回的配置将始终与上述参数的格式相同。\n"]`
commands 列表 / elements=字符串	推送到远程设备的命令集。返回：始终示例： `["<nc:protocols xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"> <nc:lldp> <nc:interface> <nc:name>ge-0/0/1</nc:name> <nc:disable delete=\"delete\"/> </nc:interface> <nc:interface> <nc:name>ge-0/0/2</nc:name> <nc:disable/> </nc:interface> </nc:lldp> </nc:protocols>", "xml 2", "xml 3"]`

作者

Ganesh Nalawade (@ganeshrn)

junipernetworks.junos.junos_lldp_interfaces 模块 – LLDP 接口资源模块

概要

参数

示例

返回值

作者

集合链接

概要 

参数 

示例 

返回值 