cisco.iosxr.iosxr_lldp_interfaces 模块 – 配置LLDP接口的资源模块。

注意

此模块是 cisco.iosxr 集合 (版本 10.2.2) 的一部分。

如果您使用的是 ansible 软件包，则可能已经安装了此集合。它不包含在 ansible-core 中。要检查它是否已安装，请运行 ansible-galaxy collection list。

要安装它，请使用： ansible-galaxy collection install cisco.iosxr。

要在 playbook 中使用它，请指定： cisco.iosxr.iosxr_lldp_interfaces。

cisco.iosxr 1.0.0 中的新增功能

概要

  • 此模块管理 IOS-XR 设备上接口的链路层发现协议 (LLDP) 属性。

参数

参数

注释

config

列表 / 元素=字典

LLDP 接口选项的字典。

destination

字典

指定接口上的 LLDP 目标配置。

mac_address

字符串

指定接口上的 LLDP 目标 MAC 地址。

选项

  • "ieee-nearest-bridge"

  • "ieee-nearest-non-tmpr-bridge"

name

字符串

接口或以太网捆绑的名称/标识符。

receive

布尔值

启用/禁用接口上的 LLDP RX。

选项

  • false

  • true

transmit

布尔值

启用/禁用接口上的 LLDP TX。

选项

  • false

  • true

running_config

字符串

此选项仅与 state _parsed_ 一起使用。

此选项的值应是从 IOS-XR 设备通过执行命令 **show running-config int** 收到的输出。

state _parsed_ 从 running_config 选项读取配置并将其转换为 Ansible 结构化数据，然后根据资源模块的 argspec 将值返回到结果中的 _parsed_ 键中。

state

字符串

模块完成后的配置状态。

选项

  • "merged" ← (默认)

  • "replaced"

  • "overridden"

  • "deleted"

  • "parsed"

  • "rendered"

  • "gathered"

备注

注意

示例

# Using merged
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:40:23.104 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#

- name: Merge provided configuration with running configuration
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
      - name: GigabitEthernet0/0/0/1
        destination:
          mac_address: ieee-nearest-non-tmpr-bridge
        transmit: false
      - name: GigabitEthernet0/0/0/2
        destination:
          mac_address: ieee-nearest-bridge
        receive: false
    state: merged


#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/1"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/2"
#        }
# ]
#
# "commands": [
#        "interface GigabitEthernet0/0/0/2",
#        "lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "lldp transmit disable",
#        "interface GigabitEthernet0/0/0/1",
#        "lldp receive disable",
#        "lldp destination mac-address ieee-nearest-bridge"
# ]
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#


# Using replaced
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#

- name: >-
    Replace existing LLDP configurations of specified interfaces with provided
    configuration
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
      - name: GigabitEthernet0/0/0/1
        destination:
          mac_address: ieee-nearest-non-tmpr-bridge
    state: replaced


#
#
# ------------------------
# Module Execution Result
# ------------------------
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# "commands": [
#        "interface GigabitEthernet0/0/0/1",
#        "no lldp receive disable",
#        "lldp destination mac-address ieee-nearest-non-tmpr-bridge"
# ]
#
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:02:57.062 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#


# Using overridden
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:15:40.465 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#

- name: >-
    Override the LLDP configurations of all the interfaces with provided
    configurations
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
      - name: GigabitEthernet0/0/0/1
        transmit: false
    state: overridden


#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
# "commands": [
#        "interface GigabitEthernet0/0/0/2",
#        "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "no lldp transmit disable",
#        "interface GigabitEthernet0/0/0/1",
#        "no lldp destination mac-address ieee-nearest-bridge",
#        "no lldp receive disable",
#        "lldp transmit disable"
# ]
#
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/1",
#            "transmit": false
#        },
#        {
#            "name": "GigabitEthernet0/0/0/2"
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:22:25.604 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   transmit disable
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#


# Using deleted
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:26:21.498 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge
#   !
#  !
# !
#
#

- name: Delete LLDP configurations of all interfaces (Note - This won't delete the
    interfaces themselves)
  cisco.iosxr.iosxr_lldp_interfaces:
    state: deleted

#
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/1",
#            "receive": false
#        },
#        {
#            "destination": {
#                "mac_address": "ieee-nearest-non-tmpr-bridge"
#            },
#            "name": "GigabitEthernet0/0/0/2",
#            "transmit": false
#        }
# ]
#
#
# "commands": [
#        "interface GigabitEthernet0/0/0/1",
#        "no lldp destination mac-address ieee-nearest-bridge",
#        "no lldp receive disable",
#        "interface GigabitEthernet0/0/0/2",
#        "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "no lldp transmit disable"
# ]
#
#
# "after": [
#        {
#            "name": "TenGigE0/0/0/0"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/1"
#        },
#        {
#            "name": "GigabitEthernet0/0/0/2"
#        }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:30:14.618 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#
# Using parsed:
# parsed.cfg

# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge

- name: Convert lacp interfaces config to argspec without connecting to the appliance
  cisco.iosxr.iosxr_lldp_interfaces:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# ------------------------
# Module Execution Result
# ------------------------

# parsed: [
#   - name: GigabitEthernet0/0/0/1
#       destination:
#         mac_address: ieee-nearest-non-tmpr-bridge
#       transmit: False

#     - name: GigabitEthernet0/0/0/2
#       destination:
#         mac_address: ieee-nearest-bridge
#       receive: False
#   ]

# Using gathered:
# Device config:

# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
#  ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
#  lldp
#   receive disable
#   destination mac-address
#    ieee-nearest-bridge
#   !
#  !
# !
# interface preconfigure GigabitEthernet0/0/0/2
#  lldp
#   transmit disable
#   destination mac-address
#    ieee-nearest-non-tmpr-bridge

- name: Gather IOSXR lldp interfaces configuration
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
    state: gathered

# ------------------------
# Module Execution Result
# ------------------------

#   gathered:
#     - name: GigabitEthernet0/0/0/1
#       destination:
#         mac_address: ieee-nearest-non-tmpr-bridge
#       transmit: False

#     - name: GigabitEthernet0/0/0/2
#       destination:
#         mac_address: ieee-nearest-bridge
#       receive: False

# Using rendred:
- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_lldp_interfaces:
    config:
      - name: GigabitEthernet0/0/0/1
        destination:
          mac_address: ieee-nearest-non-tmpr-bridge
        transmit: false
      - name: GigabitEthernet0/0/0/2
        destination:
          mac_address: ieee-nearest-bridge
        receive: false
    state: rendered
# ------------------------
# Module Execution Result
# ------------------------

# "rendered": [
#        "interface GigabitEthernet0/0/0/2",
#        "lldp destination mac-address ieee-nearest-non-tmpr-bridge",
#        "lldp transmit disable",
#        "interface GigabitEthernet0/0/0/1",
#        "lldp receive disable",
#        "lldp destination mac-address ieee-nearest-bridge"
# ]

返回值

公共返回值已在 此处 记录，以下是此模块独有的字段

键

描述

after

列表 / 元素=字符串

模块完成后的配置作为结构化数据。

返回：发生更改时

示例： ["The configuration returned will always be in the same format\n of the parameters above.\n"]

before

列表 / 元素=字符串

模块调用之前的配置作为结构化数据。

返回：始终

示例： ["The configuration returned will always be in the same format\n of the parameters above.\n"]

commands

列表 / 元素=字符串

推送到远程设备的命令集。

返回：始终

示例： ["interface GigabitEthernet0/0/0/1", "lldp destination mac-address ieee-nearest-non-tmpr-bridge", "no lldp transmit disable"]

作者

  • Nilashish Chakraborty (@nilashishc)