arista.eos.eos_interfaces 模块 – 接口资源模块

注意

此模块是 arista.eos 集合（版本 10.0.1）的一部分。

如果您正在使用 ansible 包，您可能已经安装了此集合。它不包含在 ansible-core 中。要检查是否已安装，请运行 ansible-galaxy collection list。

要安装它，请使用：ansible-galaxy collection install arista.eos。

要在 playbook 中使用它，请指定：arista.eos.eos_interfaces。

arista.eos 1.0.0 中的新增功能

概要 

此模块管理 Arista EOS 接口的接口属性。

参数 

参数	注释
config 列表 / 元素=字典	提供的配置
description 字符串	接口描述
duplex 字符串	接口链路状态。仅适用于以太网接口。除 `auto` 之外的值还必须设置 speed。当 speed 设置为高于 `1000` 时将被忽略。
enabled 布尔值	接口的管理状态。将该值设置为 `true` 以管理方式启用接口，或设置为 `false` 以禁用它。选项 `false` `true` ← (默认)
mode 字符串	管理接口的第 2 层或第 3 层状态。仅适用于以太网和端口通道接口。选项 `"layer2"` `"layer3"`
mtu 整数	特定接口的 MTU。必须是介于 576 和 9216 之间的偶数。仅适用于以太网接口。
name 字符串 / 必需	接口的全名，例如 GigabitEthernet1。
speed 字符串	接口链路速度。仅适用于以太网接口。
running_config 字符串	此选项仅与状态 parsed 一起使用。此选项的值应是通过执行命令 show running-config \| section ^interface 从 EOS 设备接收的输出。状态 parsed 从 `running_config` 选项中读取配置，并根据资源模块的参数规范将其转换为 Ansible 结构化数据，然后该值将返回到结果中的 parsed 键中。
state 字符串	模块完成后配置的状态。选项 `"merged"` ← (默认) `"replaced"` `"overridden"` `"deleted"` `"parsed"` `"rendered"` `"gathered"`

备注 

注意

已针对 Arista EOS 4.24.6F 进行测试
此模块与连接 network_cli 一起工作。请参阅 https://docs.ansible.org.cn/ansible/latest/network/user_guide/platform_eos.html

示例 

# Using merged

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Merge provided configuration with device configuration
  arista.eos.eos_interfaces:
    config:
      - name: Ethernet1
        enabled: true
        mode: layer3
      - name: Ethernet2
        description: Configured by Ansible
        enabled: false
    state: merged

# Task Output
# -----------
#
# before:
# - enabled: true
#   name: Ethernet1
# - enabled: true
#   name: Ethernet2
# - enabled: true
#   name: Management1
# commands:
# - interface Ethernet1
# - no switchport
# - interface Ethernet2
# - shutdown
# - description Configured by Ansible
# after:
# - enabled: true
#   mode: layer3
#   name: Ethernet1
# - description: Configured by Ansible
#   enabled: false
#   name: Ethernet2
# - enabled: true
#   name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
#    no switchport
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using replaced

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
#    no switchport
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Replaces device configuration of listed interfaces with provided configuration
  arista.eos.eos_interfaces:
    config:
      - name: Ethernet1
        enabled: true
      - name: Ethernet2
        description: Configured by Ansible
        enabled: false
    state: replaced

# Task Output
# -----------
#
# before:
# - enabled: true
#   mode: layer3
#   name: Ethernet1
# - description: Configured by Ansible
#   enabled: false
#   name: Ethernet2
# - enabled: true
#   name: Management1
# commands:
# - interface Ethernet1
# - switchport
# after:
# - enabled: true
#   name: Ethernet1
# - description: Configured by Ansible
#   enabled: false
#   name: Ethernet2
# - enabled: true
#   name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using overridden

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Overrides all device configuration with provided configuration
  arista.eos.eos_interfaces:
    config:
      - name: Ethernet1
        enabled: true
      - name: Ethernet2
        description: Configured by Ansible
        enabled: false
    state: overridden

# Task Output
# -----------
#
# before:
# - enabled: true
#   name: Ethernet1
# - description: Configured by Ansible
#   enabled: false
#   name: Ethernet2
# - enabled: true
#   name: Management1
# commands:
# - interface Management1
# - no shutdown
# after:
# - enabled: true
#   name: Ethernet1
# - description: Configured by Ansible
#   enabled: false
#   name: Ethernet2
# - enabled: true
#   name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using deleted

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Delete or return interface parameters to default settings
  arista.eos.eos_interfaces:
    config:
      - name: Ethernet1
    state: deleted

# Task Output
# -----------
#
# before:
# - enabled: true
#   name: Ethernet1
# - description: Configured by Ansible
#   enabled: false
#   name: Ethernet2
# - enabled: true
#   name: Management1
# commands:
# - interface Ethernet1
# - no shutdown
# after:
# - enabled: true
#   name: Ethernet1
# - description: Configured by Ansible
#   enabled: false
#   name: Ethernet2
# - enabled: true
#   name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using rendered

- name: Render the provided configuration into platform specific configuration lines
  arista.eos.eos_interfaces:
    config:
      - name: Ethernet1
        enabled: true
        mode: layer3
      - name: Ethernet2
        description: Configured by Ansible
        enabled: false
    state: rendered

# Module Execution Result:
# ------------------------
#
# rendered:
# - interface Ethernet1
# - no shutdown
# - no switchport
# - interface Ethernet2
# - shutdown
# - description Configured by Ansible

# Using Parsed

# File: parsed.cfg
# ----------------
#
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
#    description "Configured by Ansible"
#    shutdown
# !

- name: Parse the commands for provided configuration
  arista.eos.interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# parsed:
#  - name: Ethernet1
#    enabled: True
#    mode: layer2
#  - name: Ethernet2
#    description: 'Configured by Ansible'
#    enabled: False
#    mode: layer2

# Using Gathered

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Gather interfaces facts from the device
  arista.eos.interfaces:
    state: gathered

# Module Execution Result:
# ------------------------
#
# gathered:
# - enabled: true
#   name: Ethernet1
# - description: Configured by Ansible
#   enabled: false
#   name: Ethernet2
# - enabled: true
#   name: Management1

返回值 

常见的返回值记录在此处，以下是此模块独有的字段

键	描述
after 字典	模块执行后的结果配置。返回：当已更改时示例： `"此输出将始终与模块参数规范的格式相同。\n"`
before 字典	模块执行之前的配置。返回：当 state 为 `merged`、`replaced`、`overridden`、`deleted` 或 `purged` 时示例： `"此输出将始终与模块参数规范的格式相同。\n"`
commands 列表 / 元素=字符串	推送到远程设备的一组命令。返回：当 state 为 `merged`、`replaced`、`overridden`、`deleted` 或 `purged` 时示例： `["interface Ethernet1", "no shutdown", "no switchport"]`
gathered 列表 / 元素=字符串	以结构化数据形式从远程设备收集的网络资源的事实。返回：当 state 为 `gathered` 时示例： `["此输出将始终与模块参数规范的格式相同。\n"]`
parsed 列表 / 元素=字符串	根据模块参数规范将 running_config 选项中提供的设备原生配置解析为结构化数据。返回：当 state 为 `parsed` 时示例： `["此输出将始终与模块参数规范的格式相同。\n"]`
rendered 列表 / 元素=字符串	任务中提供的配置以设备原生格式呈现（离线）。返回：当 state 为 `rendered` 时示例： `["interface Ethernet1", "no shutdown", "no switchport"]`

作者

Nathaniel Case (@Qalthos)